Simulation of fine polydisperse particle condensational growth under an octadecane–nitrogen atmosphere

The evolution of particle size distribution (PSD) of fine polydisperse particles at high number concentrations (>10⁵ cm⁻³) was simulated through a combined model employing direct quadrature method of moments (DQMOM) with heat and mass transfer equations. The PSD was assumed to retain log-normal distribution during the heterogeneous condensation process. The model was first verified by exact solution and experimental data prior to investigating the influence of initial conditions on final PSD under an octadecane–nitrogen atmosphere. Low particle number concentrations and high vapor concentrations were beneficial to shift the PSD to larger particles having a narrower distribution. Additionally, vapor depletion has more influence on the final PSD than the heat release parameter for a number concentration of 10⁶ cm⁻³. This study may assist the design process of a gas–solid separating cyclone, to eliminate dust from high-temperature volatiles by pyrolysis of solid fuels.     

NMR analysis and triad sequence distributions of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoates (PHAs) are considered promising “green” alternatives to synthetic polymers because they are bio-derived, biodegradable and biocompatible. The properties of bacterial PHA copolymers depend on their microstructures, which can be modified with the use of different fermentation processes and feed materials. Thus, it is desirable to have an improved testing method for the determination of PHA microstructures. In this work, a detailed NMR analysis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) microstructure was made. Previously only two of the hydroxyvalerate ¹³C NMR peaks have been assigned at the triad level. In this work, three of the ¹³C hydroxyvalerate peaks and two of the hydroxybutyrate peaks were found to be split into four peaks each due to comonomer sequence effects. Using eight copolymer samples with a wide compositional range, we were able to assign all these peaks to B-centered and V-centered triad sequences. Through curve deconvolution, the triad intensities were determined. These triad sequence intensities can then be analyzed via both the first-order Markovian and two-component Bernoullian models to obtain more in-depth information on copolymer composition and comonomer reactivities.     

Engineering Carbon Distribution in Silicon-Based Anodes at Multiple Scales

The successful commercialization of promising silicon-based anode materials has been hampered by their poor cycling stability caused by the huge volume change. Integration of the carbon matrix with silicon-based (C/Si-based) anode materials has been demonstrated to be a powerful solution to achieve satisfactory electrochemical performance. This minireview aims to outline recent developments on C/Si-based composites, with the emphasis on the importance of carbon distribution at multiple scales. In addition, the forms of the carbon framework (carbon sources and doping of heteroatoms) have been summarized. Particularly, a novel C/Si-based hybrid with carbon distributed at the atomic scale has been highlighted.     

发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

Optimal control and numerical methods for hybrid stochastic SIS models

This work focuses on optimal controls of a class of stochastic SIS epidemic models under regime switching. By assuming that a decision maker can influence the infectivity period, our aim is to minimize the expected discounted cost due to illness, medical treatment, and the adverse effect on the society. In addition, a model with the incorporation of vaccination is proposed. Numerical schemes are developed by approximating the continuous-time dynamics using Markov chain approximation methods. It is demonstrated that the approximation schemes converge to the optimal strategy as the mesh size goes to zero. Numerical examples are provided to illustrate our results.     

甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

(Sm0.5Gd0.2Nd0.3)2(Hf0.3Ce0.7)2O7复合氧化物的热物理性能

为寻求新型热障涂层用陶瓷材料,本文采用高温固相烧结法制备了(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。利用XRD分析了其晶体结构,SEM分析其显微组织,膨胀仪测试其热膨胀性能,激光热导仪测试其热扩散系数。结果表明,成功制备了具有单一萤石晶体结构的(Sm_0.5Gd_0.2Nd_0.3)₂(Hf_0.3Ce_0.7)₂O₇复合氧化物。其显微组织结构致密,晶界清晰无其他相存在。由于复杂的元素组成和较大的原子量,其热导率明显低于7YSZ和Sm₂Ce₂O₇。其较低的热膨胀系数则归因于B位离子较小的离子半径,但其热膨胀系数依然满足热障涂层的要求。     

基于流量测点的热网变动阻力系数优化辨识

随着供热计量系统的普及，系统可以根据负荷的变化进行调整，管网的阻力系数随即发生变化。对变动阻力系数进行优化辨识是了解供热管网实时运行状况的有效手段。提出一种基于流量监测数据的供热管网变动阻力系数优化辨识方法，并利用遗传算法进行求解。对洛阳市某小区供暖季管网实际运行数据进行验证，辨识结果的相对误差在5%以内。结果表明：该方法可以在只有流量观测数据时得到精度较高的供热管网变动阻力系数，为供热系统的运行调节提供指导。     

固体核磁共振结合密度泛函理论计算研究SSZ-39分子筛的钠离子落位与铝分布

具有AEI结构的SSZ-39分子筛的骨架外阳离子落位和铝分布对其催化性能影响显著.AEI笼中有三个结晶学不等价位，且铝取代T位具有一定的倾向性.本文结合固体核磁共振（NMR）技术（²⁷Al/²³Na MQ MAS NMR），以及密度泛函理论（DFT）计算，研究了不同硅铝比Na-SSZ-39分子筛中的Na⁺落位和铝分布.在孤立铝分布的情况下，铝原子优先占据于T3位，Na⁺主要落位于AEI笼中的SIIa0和SIII'a0位点上，其中SIII'a0位点的优先度较高，此外少部分Na⁺还落位于六棱柱内部的SIa0.当铝对存在时，AlSiSiAl分布的铝对占据六元环的对位（T3-T3），对应的Na⁺分别落位于SIIa1和SⅢ'a1位点.随着分子筛结构的部分破坏，游离的Na⁺可能形成明显的SIII'b位点.本文可加深对SSZ-39分子筛构效关系的理解，为更好地调控催化性能奠定基础.